Diamond Rib Steel
Canadian made, Diamond Rib steel panels are mostly used in sheds or barns as siding or interior ceiling and wall panels. Durable metal, built to last and like tuff rib, there are 4 layers of protection in the paint system.
It starts with coating the steel in Metallic zinc-aluminum or zinc. This becomes the foundation for the rest of the paint system.
Chemical Pretreatment makes sure the adhesion between the primer and metal is permanent. The flexible Primer inhibits corrosion especially at cut edges and promotes topcoat adhesion.
The Quality topcoat is a silicone-modified polyester coating which is state-of-the-art. Providing 40years of film integrity and 30 years of minimal fade and chalk values.
Also commonly known as barn steel, it gives a traditional steel look. This is the most economical way to enjoy the benefits of steel on your project.
| Panel Length | 1-30 ft Pending Transportation limits |
| Panel Width | 36” Coverage |
| Panel Gauge | 29 Ga Standard |
| Rib Height | 5/8” – 3/4″ |
| Fastener | Screw Through |
| Recommended Slope | Not recommended for roofs |
| Application | Siding Interior walls Ceilings Fences Accent walls Soffit Longer Panels |
| CAD Drawing | Link to Profile |
